Insulin Syringe Sizes

Insulin Syringe Sizes

Insulin syringe sizes: U-100, U-40 and U-500 barrels, plus mL syringes from 0.5 to 10 mL.

Pick a syringe size

20 units= 0.2 mL

20 units on a U-100 syringe is 0.2 mL, about 1/25 of a teaspoon.

Needle

0.25 mm31 gauge (width)
0.236 in6 mm (length)
Gauge
Length

A bigger gauge number means a thinner needle.

Sources: U-100 sizes FDA K190054; U-40 FDA K193273; U-500 FDA K151870; mL syringes FDA K212226, FDA K203453, FDA K172670. Gauges 26G to 32G on insulin syringes: FDA K230061. Widths: the metric sizes in FDA K230043 and FDA K193273, and for 26G the Vita Needle inch chart; lengths from FDA K190054, FDA K230043 and FDA K230061. Teaspoon: NIST SP 811.

The marks show how a scale reads. Lines on a real barrel vary by maker, so read your own box. This does not show an amount to draw or take.

U-100 insulin syringe size chart

Showing all 17 sizes.

Barrel, needle length and gauge sets listed in one maker's FDA filing (FDA K190054). Needle width is the metric size in FDA filings.
BarrelHoldsSmallest lineNeedle lengthGaugeNeedle width
0.3 mL30 units1 unit, or 1/2 unit on half unit barrels12.7 mm1/2 in29G0.33 mm0.013 in
0.3 mL30 units1 unit, or 1/2 unit on half unit barrels12.7 mm1/2 in30G0.30 mm0.012 in
0.3 mL30 units1 unit, or 1/2 unit on half unit barrels8 mm0.315 in29G0.33 mm0.013 in
0.3 mL30 units1 unit, or 1/2 unit on half unit barrels8 mm0.315 in31G0.25 mm0.010 in
0.3 mL30 units1 unit, or 1/2 unit on half unit barrels6 mm0.236 in31G0.25 mm0.010 in
0.5 mL50 units1 unit12.7 mm1/2 in28G0.36 mm0.014 in
0.5 mL50 units1 unit12.7 mm1/2 in29G0.33 mm0.013 in
0.5 mL50 units1 unit12.7 mm1/2 in30G0.30 mm0.012 in
0.5 mL50 units1 unit8 mm0.315 in31G0.25 mm0.010 in
0.5 mL50 units1 unit6 mm0.236 in31G0.25 mm0.010 in
1 mL100 units2 units, or 1 unit on some16 mm0.63 in27G0.40 mm0.016 in
1 mL100 units2 units, or 1 unit on some12.7 mm1/2 in28G0.36 mm0.014 in
1 mL100 units2 units, or 1 unit on some12.7 mm1/2 in29G0.33 mm0.013 in
1 mL100 units2 units, or 1 unit on some12.7 mm1/2 in30G0.30 mm0.012 in
1 mL100 units2 units, or 1 unit on some8 mm0.315 in30G0.30 mm0.012 in
1 mL100 units2 units, or 1 unit on some8 mm0.315 in31G0.25 mm0.010 in
1 mL100 units2 units, or 1 unit on some6 mm0.236 in31G0.25 mm0.010 in

Sizes only. This chart does not show an amount to draw or take. Pick a size with your care team or pharmacist.

True-size needle length chart

Print this at 100 percent (Actual size), not Fit to page. Then lay a ruler on the black bar. It should be 50 mm. If it is not, the lengths below are off by the same amount.

50 mm check bar4 mm (pen needle)5 mm (pen needle)6 mm (syringe or pen)8 mm (syringe or pen)12.7 mm (syringe, 1/2 inch)16 mm (syringe)

Lengths from FDA filings for insulin syringes and pen needles. The bars show length only, not a needle to use.

Prefer

Last updated October 18, 2026

Learn

More about this page

On the common U-100 scale, insulin syringes come in three barrels: 0.3 mL, 0.5 mL and 1 mL, which hold 30, 50 and 100 units. Each one comes with a fixed needle in a few lengths and widths. Pick a scale and a size to see the barrel, or use the size chart to filter by barrel, needle length or gauge.

The three barrel sizes

The barrel is the clear tube with the scale. Its size tells you the most it can hold. One maker's FDA filing lists these three U-100 barrels:

BarrelHolds on a U-100 scaleSmallest line
0.3 mL30 units1 unit, or 1/2 unit on half unit barrels
0.5 mL50 units1 unit
1 mL100 units2 units, or 1 unit on some

The 0.3 mL barrel is the smallest insulin syringe size of the three. In the filings we read, the 0.3 and 0.5 mL barrels have 1/2 or 1 unit lines, and the 1 mL barrels have 1 or 2 unit lines. So always check the lines on your own syringe.

To learn what each line means, see how to read an insulin syringe. To turn units into mL, use the units to mL converter.

Needle lengths and gauges

In the insulin syringe filings we read, the needle is permanently attached to the barrel. In one maker's filing, the needles are 6, 8, 12.7 or 16 mm long and run from 27 gauge to 31 gauge.

  • Length is how far the needle reaches. 12.7 mm is exactly 1/2 inch.
  • Gauge is how wide the needle is. A bigger gauge number means a thinner needle, so 31G is thinner than 27G.

In 2016, 183 diabetes experts published new advice on giving insulin. Their first choice was the shortest needles of that time: 4 mm on pens and 6 mm on syringes. The needle choice is one you make with your care team. See insulin needle size for more, and the needle gauge size chart for widths in mm.

Source: Frid 2016, PMID 27594187.

U-100, U-40 and U-500 syringes are not the same

The "U" number tells you the scale on the barrel. It must match the insulin.

  • U-100 syringes are made for insulin with 100 units in each mL. The label on that insulin says to use only a U-100 syringe.
  • U-40 syringes are made for insulin with 40 units in each mL. Some insulin for dogs and cats is U-40. Its label says any other syringe will give the wrong dose. Two FDA filings show U-40 syringes in the same barrel sizes, with a red needle cap. In those filings the U-100 syringes have an orange cap.
  • U-500 syringes are made for one very strong insulin. They hold 0.5 mL, have a green needle shield and mark each line as 5 units. The insulin label warns that a U-100 syringe used with U-500 insulin can give a 5 times overdose.

Never move from one kind to another without your care team. The same line on two kinds of syringe is not the same amount.

How the syringe picker works

The picker draws one syringe for the size you pick. Slide or type a number and the barrel fills to it. It shows the mL and a rough teaspoon size, so the number is easier to picture. It does not tell you an amount to draw or take.

  • U-100 has 0.3, 0.5 and 1 mL barrels. U-40 has the same three sizes in one FDA filing. U-500 has one 0.5 mL barrel with 5 unit lines.
  • mL syringes of 0.5, 1, 3, 5 and 10 mL are marked in mL, not in insulin units.
  • On a U-40 or U-500 barrel, a unit is a different volume. Units only match on a syringe with the same U number as the label.
  • A US teaspoon is about 4.93 mL, so 0.2 mL is about 1/25 of a teaspoon.
  • The needle row shows gauges 26G to 32G, all listed for insulin syringes in one FDA filing, and lengths of 4 to 12.7 mm.

Each size and figure comes from the FDA filings and the NIST table listed under Sources. The marks are drawn evenly to show how a scale reads; lines on a real barrel vary by maker.

How we built this chart

Every row in the chart comes from a document we read. The barrels, lengths and gauges are copied from FDA 510(k) summaries. These are the papers a maker files to sell a device in the US. No row is a store listing.

We also drew the needle lengths at true size, with a 50 mm check bar. On 6 October 2026 we printed the chart to PDF in headless Chrome on US Letter and A4 paper at 100 percent. Then we measured the PDF at 600 dots per inch.

PaperCheck barErrorPages for the chart
US Letter49.996 mm0.008 percent1
A449.996 mm0.008 percent1

Every length bar came out within 0.05 mm of its true length. A home printer can still shrink a page, so measure the check bar with a ruler before you trust it. We have not yet done that test with a real printer and ruler.

Questions

What are the three sizes of insulin syringes?

The three sizes are 0.3 mL, 0.5 mL and 1 mL. On a U-100 scale they hold 30, 50 and 100 units.

What is the most common insulin syringe size?

No public sales count for these sizes turned up in our search. In one maker's filing, all three sizes come with a 31 gauge needle that is 6 or 8 mm long. Only the 1 mL size has the 16 mm needle.

What is the difference between U-40 and U-100 syringes?

A U-100 syringe is marked for insulin with 100 units in each mL. A U-40 syringe is marked for insulin with 40 units in each mL. In two FDA filings, U-40 syringes have a red needle cap and U-100 syringes an orange one. Use only the kind that matches the insulin label.

Which is smaller, 31G or 32G?

32G is the thinner needle. A bigger gauge number means a thinner needle. FDA filings list 32G as 0.23 mm wide and 31G as 0.25 mm wide.

Sources

16 sources with read dates
  1. Frid AH et al. New Insulin Delivery Recommendations. Mayo Clin Proc 2016;91(9):1231 to 1255, DOI 10.1016/j.mayocp.2016.06.010, PMID 27594187, abstract read 2026-10-06
  2. FDA 510(k) summary K190054, BD Insulin Syringe (2019), sizes, needle lengths, gauges and scale lines, read 2026-10-06
  3. FDA 510(k) summary K260208, Ultra-Fine SAFETY Insulin Syringe (2026), 1 mL barrel with 1 unit lines, read 2026-10-06
  4. FDA 510(k) summary K193273, Insulin Syringe for U-40 and U-100 insulin (2021), 0.3, 0.5 and 1 mL U-40 and U-100 sizes, red and orange needle caps, needle widths, read 2026-10-06
  5. FDA 510(k) summary K253068, Profoject Insulin Syringes (2026), red U-40 and orange U-100 needle caps, read 2026-10-06
  6. FDA 510(k) summary K230061, Insulin Syringe (2023), needle gauges 26G to 33G on 0.3, 0.5 and 1 mL insulin syringes, read 2026-10-06
  7. FDA 510(k) summary K212226, DR Safety Syringe (2021), 0.5, 1, 3 and 5 mL syringes, read 2026-10-06
  8. FDA 510(k) summary K203453, BD Hypodermic Syringe (2021), 1 mL and 0.5 mL barrels with mL scale marks, read 2026-10-06
  9. FDA 510(k) summary K172670, BD Single Use Hypodermic Syringe (2018), 3, 5 and 10 mL with a graduated scale, read 2026-10-06
  10. Vita Needle Company, Hypodermic Tube Gauge Chart, 26 gauge outside width 0.018 inch, read 2026-10-06
  11. NIST Guide for the Use of the International System of Units, Appendix B.9, 1 teaspoon = 4.928 922 mL, read 2026-10-06
  12. FDA 510(k) summary K151870, BD U-500 Insulin Syringe (2016), read 2026-10-06
  13. FDA 510(k) summary K230043, Insulin Pen Needle (2023), metric needle widths by gauge, read 2026-10-06
  14. DailyMed label, a U-100 human insulin (setid b519bd83), "Use only with a U-100 syringe", read 2026-10-06
  15. DailyMed label, a U-500 human insulin (setid b60e8dd0), syringe warning, read 2026-10-06
  16. DailyMed label, a U-40 insulin for dogs and cats (setid 4472644f), U-40 syringe warning, read 2026-10-06